- One-to-one type (
Full automated
and all in one line )
-
Automatic Mask Making Machine (ALL IN ONE) for
3 Ply Mask (3 layers) Mask
and 4 ply Mask (4 layers)
Mask on the same machine.
Please must see our
machine video carefully about the difference with the other
suppliers.
COMPARISON ITEMS
CISFUN
OTHERS
CHINA
Machine Working Action Part
CAM (no need maintenance and no wear and tear)
Pneumatic Cylinder
Speed in 1 main machine only
160~180 pcs/minute
50~60pcs/minute
Air Compressor
NO NEED
YES (8HP up)
Working power
6KW
>15KW
Factory Floor Space
Small (We make everything ALL
IN ONE, so you just need only 1 machine
for CF-1200C)
Big (Need 1 main machine to match with 2 or 3
ear band machines)
Consumables
Few
A lot
Assembly & Operation & Maintenance
Easy
Difficult
Maintenance Cost
Cheap
Expensive
Made in
Taiwan
Mix
China
Life time
if run it 12-14 hours daily
Long
Short
Machine Price
Reasonable (But you can still Cost Recovery in a
month)
Medium
Low
Finished product:
Feature:
weld the ear band by
"CAM"
:We use the ˇ§CAMˇ¨ Design to weld the ear band (ear
loop). It is Faster than Pneumatic Cylinder Design. We do
not use Pneumatic Cylinder on our machine. So it is faster
than the other suppliers.
Advantages:
Our machine is designed and driven by CAM, not
Pneumatic Cylinder. So no need Air Compressor. And the
Maintenance is a few cost. And the reliability is higher
than the other suppliers machines.
simple assembly
: Our machine is with different designs, we combine Face
Mask Ontology Machine+ Ear loop welding machine (ear band
spot welding). So you do not worry about the problem of
component damaged and the machine adjustment and machineˇ¦s
training after you receive the machine. You just need to do
simple assembly after you receive the machine and then you
can start mass production.
no need a
lot consumables :
As we know, the machineˇ¦s design of the other
suppliers need a lot consumables. Our machine does not need
a lot consumables.
Full automatic : This mask making machine is mainly used for automatic
forming of flat masks, driven by the roller after unwinding the
whole roll of cloth, and the cloth is automatically hemmed
and wrapped. Nose clip whole roll traction unwinding, after
cutting to a fixed length, it is introduced/fed into the edging
cloth, and two sides are welded to the sealing by
ultrasonic waves, and then the ultrasonic side sealing is
performed by the cutting with a cutter. The mask is conveyed to
the rotating earband welding through an assembly line, and
the final mask is formed by the ultrasonic welding. After the
mask is manufactured, it is conveyed to a flat belt line for
collection.
Specifications:
-Production specifications: Standard mask type (Size:175
* 95mm)
-Applicable material specifications:
ITEMs
Feeder Q'ty
Width
(mm)
Coil OD (mm)
Barrel ID (mm)
Weight
Non Woven Fabric/
Meltblown Cloth
4
175~200
Dia. 600
Dia. 76.2
Max 15kg
Nose clip steel wire covered plastic / pure
steel wire / full plastic
1
3-7
Dia. 400
Dia. 76.2
Max 25kg
Earband
4 bags
175*3
(diameter)
N/A
N/A
N/A
Wrapping
4 bags
20
Dia. 455
Dia. 38
Max 10kg
Examples of material
selection:
1ˇBPP spunbond PPSB-200mm * 36g (inside of
your face)
2ˇBMelt-blown175mmX18g
3ˇBPP spunbond PPSB-175mm * 18g (outside of
your face)
4ˇBSuggested Nose Wire: 3.00mm * 0.80mm
(Diameter 3~3.8mm)
The above 4 items should be
prepared by the buyer.
